Solid flex rubber industrial tires rims 6.00-9/4.00 together Solid size: 6 .00-9, 6 .00 × 9, 6 .00 * 9, 6 .00x9, 6 00-9, 6 00*9, 6 00 × 9, 6 00x9 etc Rim size is 4 .00-9 6.00-9/4.00 Specification For this size of tire, we usually recommend the spilt rim. Solid tire and split rim together: If you...
Customized wheels mold-on solid press-on tire 16x5x10½ special equipment used
Mould on tire ( solid tire with rim).
Or called cured on tires,because the rims connect with tires during the production.
16x5x10½ Specification
Size of tire/rim | Pattern No. | Outside Diameter ±5mm | Section Width ±5mm | Net Weight(Kg) ±1.5%kg |
16x5x10½ | R710 | 406.4 | 127 | 17 |
We don’t produce rims ourselves. All rims are purchased from cooperation factory as a kind of service for our customers. We can customize the rim according to your install data to fit for your equipment.
After we got the customized wheels, curing reasonable rubber around the baseband surface to guarantee the loading of tires and other usage performance.
--Smaller deformation , better stability and security.
--Running smoothly , slight shaking and twittering.
--Low rolling resistance, deducing energy consumption. Basebands can be recycled reducing cost and in accordance with the world trend of low-carbon economy.
--Easy assembling, no need to fit rims. Can be fixed to the vehicles and facilities directly , no worry for sliping
--Lower heat built up, good heat yield , over come the blow-out problems.
--Heavier loading, 10-15% increase of loading than the same size of tires
Above picture is the one which we produce for our customer whcih they used for theire new products(not special equipment)-only their new modle forlkift equipment.
