Home > Knowledge > Content

The matters needing attention of forklift spare solid tire installation

May 18, 2018

After removing the old solid forklift tire, the only thing to do is to install a spare solid forklift tire. Before installation, we must confirm whether the spare solid forklift tire is normal, and if the spare solid forklift tire has been used before, we must do a simple inspection of the spare solid forklift tire tread to see if there are crack. The next step is to install a forklift spare solid tire.


Before installing the forklift spare solid tire, it is best to place the removed solid forklift tire on the bottom of the vehicle to avoid the accident that the jack is misaligned and the vehicle wheel lands.


After that, the forklift spare solid tire can be replaced. In this process, it is more difficult to align the forklift spare solid tire with the wheel fixing screws. If the forklift is raised too high, the forklift spare solid tire must be lifted very high. It is best to find someone to help when changing the forklift solid tire. If one person is operating, it is recommended to use the legs or feet to stand on the forklift spare solid tire to prevent displacement. When screwing, do not screw the screws clockwise or counterclockwise one by one. Instead, turn the screws in the order of the diagonals. When screwing, it is better to keep the same number of turns for each screw. It is to ensure that the screws are evenly loaded. After the screws are screwed on, we can remove the jacks (simultaneously removing the forklift solid tires under the forklift) and return the vehicle to the ground. After that, we can tighten each screw by physical force as the forklift solid tires are removed. Follow the diagonal approach.


Important precautions when installing the forklift spare solid tire:

1. Before installing the forklift spare solid tire, do a simple inspection on the forklift spare solid tire and place the removed forklift solid tires on the bottom of the vehicle to avoid accidents;

2. Remove the jacks after tightening the forklift solid tires retaining screws. When tightening the screws, tighten the screws in the diagonal order. Do not screw them in clockwise or counterclockwise.


28x9-15  4.jpg WRST White solid tire18X7-8 (1).jpg 8.25-15.jpg

Rim2.jpg 700-12 solid tire and split rim.jpg white 28x9-15 tire & rim for JLG (7).jpg


Our company and office

factory_.jpg WONRAY office.jpg


Our workshops

workshop.jpg

Please contact us now!

Click here to contact us more.

Yantai Wonray Rubber Tire Co.,Ltd.