Home > Knowledge > Content

Installation methods and matters of spare wheel for forklift truck tyre

Oct 19, 2017

After removing the forklift tyre, the spare tire is to be installed. Before installing, we need to confirm whether the tire pressure is normal, and if used before the spare tire, to the spare tire tread to do a simple inspection, see if there are scratches, whether there is a stone sandwiched in the gap. The next thing to do is to install a forklift tyre spare tire.

Before installing the spare tyre of forklift truck, it is better to put the disassembled forklift tyre on the bottom of the car to avoid the accident of the wheel landing caused by the dislocation of the jack. After that, you can change the spare tire, in this process, the more difficult is to the spare wheel and the wheel fixed screw alignment, the car is too high, you have to lift the spare tire very high. The author suggests that the best able to find someone to help, if a person with a leg or foot against operation spare tire, prevent displacement. In the screw do not in accordance with the clockwise or counterclockwise screw in screw, but in accordance with the order of diagonal screw in the screw each screw best laps to maintain consistent, to ensure uniform force screw. After the screw, we can remove the jack (and will pad in the car, the vehicle wheel removed) back to the ground, after that in accordance with the removal of the tyre, rely on physical strength will each screw, is also in accordance with the diagonal way.

Matters needing attention when installing spare tyre for forklift truck:

1, before the installation of spare tire, first to do a simple inspection of the spare tire, and the demolition of the tire placed in the car, to avoid accidents;

2, the tire fixed screws are all screwed, then remove the jack, screw the screw should be in the diagonal order screw, don't clockwise or counterclockwise clockwise twist.