Home > Knowledge > Content

Industrial Solid Tires Wear resistance

Oct 23, 2017

Pneumatic tires are now widely used in tire types, and tires corresponding to pneumatic tires - solid tires are now being used more and more, compared with the pneumatic tires more tires more wear resistance.

Solid tires are mainly used for low-speed heavy-duty lifting vehicles, Industrial Solid Tires traction vehicles and flatbed vehicles and other industrial vehicles, and solid tires are also widely used in all walks of life, for example, military, construction machinery and other fields.

First of all, the need for tire and rim fit to check, it should be noted that with the specifications of the tires used in the rim width is different, this is very important to use, Industrial Solid Tires so to confirm. And when checking the rim, pay attention to check whether the rim is defective, whether there is no burr.

Secondly, when the solid tire is installed, it is necessary to spray and apply the lubricant to the outer surface of the tire hub and the rim. This can reduce the friction between the rim and the tire. In addition, it is necessary to pay attention to the use of grease And other industries commonly used lubricants, once used, it will swell rubber, damage the tires.

Finally, to tell you that the tire to the rim when placed flat, Industrial Solid Tires do not skew, otherwise it will make the installation into difficulties, there must be installed in place in the rim, while the bolts tight, Industrial Solid Tires or easy Slip or tire rims are dangerous. In addition, according to the ETRTOEDI standard requirements, the tire must be concentric when loaded into the car. Different specifications manufacturers and wear different tires can not be installed on the same car or the same axis, not with the inflatable tire mixed, or easy to cause personal, equipment accidents.